Electrical Services

At KNORR Electrical Contractor, we make updating or adding new light fixtures simple, safe, and stress-free. Whether you're refreshing the look of a room or installing brand-new lighting, we handle the entire process from start to finish.

Our Light Fixture Replacement & Installation service includes:

• Home walkthrough & consultation: We review the fixtures you want replaced or installed, check existing wiring, and ensure the new fixtures will fit safely and properly.
• Safe removal of old fixtures: We disconnect and take down your existing lights without damaging ceilings, walls, or mounting surfaces.
• Professional installation of new fixtures: From chandeliers and pendants to flush mounts, sconces, and ceiling fans, we securely mount and wire your new fixtures to electrical code.
• Upgrades as needed: If required, we can install new boxes, support braces, or updated wiring to ensure the fixture is safely supported—especially for heavier or modern fixtures.
• Switches, dimmers & smart controls: We can add dimmers, replace outdated switches, or integrate smart lighting controls for added convenience.
• Testing & clean-up: Every fixture is tested for proper function and safety, and we leave your space neat and tidy.

Updating your light fixtures is one of the easiest ways to enhance your home’s style and functionality—and we make sure it's done right, safely, and beautifully.

At KNORR Electrical Contractor, we make ceiling fan installation safe, efficient, and worry-free. Whether you're replacing an old fan or adding a brand-new one, we handle all the electrical and structural details so your fan runs smoothly and securely.

Our Ceiling Fan Installation service includes:

• Home assessment: We evaluate the room, existing wiring, and the mounting location to ensure the ceiling can safely support the new fan.
• Removal of old fixture or fan: If replacing an existing light or outdated fan, we disconnect and remove it carefully without damaging your ceiling.
• Proper support & electrical upgrades: We install or verify a fan-rated electrical box and necessary bracing—critical for safely supporting a moving, heavier fixture.
• Professional installation: We assemble, mount, and wire the fan to code, ensuring blades are balanced and the motor runs quietly and efficiently.
• Switch & control options: We can add wall controls, dimmers (for fan lights), or remote/smart controls to give you easy, modern operation.
• Testing & clean-up: We test all fan speeds, lighting functions, and controls, then leave your space clean and ready to enjoy.

Installing a ceiling fan is a great way to improve comfort and airflow in your home—and with our professional installation, you can count on safe, smooth, long-lasting performance.

At KNORR Electrical Contractor, we ensure your bathroom stays fresh, safe, and free from excess moisture with professionally installed exhaust fans. Proper ventilation prevents mold, protects your home, and keeps your bathroom comfortable—and we make the process simple from start to finish.

Our Bathroom Exhaust Fan Installation service includes:

• Assessment of your current setup: We evaluate the existing fan (if any), electrical wiring, and ductwork to determine what upgrades or replacements are needed.
• Safe removal of old or outdated fans: We carefully disconnect and remove your existing unit while protecting ceilings and surrounding surfaces.
• Proper ducting & venting: We ensure the fan vents to the exterior of your home—not into the attic—to prevent moisture issues. This includes installing or upgrading ductwork as needed.
• Installation of a new, efficient fan: We mount and wire your new exhaust fan to electrical code, using quiet, energy-efficient models that improve airflow and comfort.
• Optional features: If desired, we can install fans with built-in lights, heaters, humidity sensors, or smart controls for automatic operation.
• Testing & clean-up: We verify proper airflow, noise levels, and all features to ensure the fan is working correctly, then leave your bathroom clean and ready to use.

A properly installed bathroom exhaust fan protects your home from moisture damage and improves everyday comfort—and we make sure it’s done right, safely, and efficiently.

At KNORR Electrical Contractor, we help homeowners protect their homes, improve energy efficiency, and maintain a balanced attic temperature with professionally installed attic exhaust fans. Proper attic ventilation reduces heat buildup, protects your roof, and can even prolong the life of your HVAC system.

Our Attic Exhaust Fan Installation service includes:

• Attic evaluation: We assess your attic space, existing ventilation, electrical access, and roof/gable location to determine the best type of fan and placement.
• Safe removal of outdated fans (if needed): We disconnect and remove any old or non-functioning attic fans safely and cleanly.
• Professional wiring & support: We run new electrical wiring if needed, ensure all components meet electrical code, and securely install the fan for long-term, reliable operation.
• Installation of the proper fan type: Whether it’s a roof-mounted, gable-mounted, or solar-powered fan, we install the best option for your home’s layout and ventilation needs.
• Thermostat or humidity control options: We can add automatic controls that turn the fan on when temperatures or humidity levels rise, keeping your attic regulated without you having to think about it.
• Testing & clean-up: We confirm the fan is operating correctly, check airflow, verify thermostat settings, and leave your attic and workspace tidy.

An attic exhaust fan is a smart investment in your home’s comfort and efficiency—and our team ensures it’s installed safely, properly, and built to last.

At KNORR Electrical Contractor, we ensure your air conditioning system has the dedicated power it needs to run safely, efficiently, and reliably. Whether you’re installing a new AC unit or upgrading an older system, we handle all the electrical requirements to keep your home cool and protected.

Our Air Conditioning Circuit Installation service includes:

• System evaluation: We review the specifications of your AC unit—central air, heat pump, mini-split, or window system—to determine the proper circuit size, breaker, and wiring.
• Dedicated circuit installation: We install a code-compliant, dedicated electrical circuit designed specifically for your air conditioning system, preventing overloads and ensuring safe operation.
• Proper wiring & conduit: We run new wiring from your electrical panel to the AC unit location, using the correct wire gauge, conduit, and protection required for the installation.
• Disconnect box installation: For outdoor units, we install a safety disconnect box so technicians can safely service the system.
• Breaker upgrades if needed: If your panel requires a new breaker or an upgrade to accommodate the AC unit, we handle this safely and to code.
• Testing & verification: We check voltage, amperage, and proper operation to ensure the AC system receives the correct power and is ready for use.
• Clean-up: We leave your home and outdoor space clean and orderly after the installation.

A properly installed air conditioning circuit protects your equipment, improves efficiency, and ensures your cooling system runs smoothly—especially during the hottest months.

At KNORR Electrical Contractor, we provide complete installation and upgrades of 100-amp and 200-amp electrical services to ensure your home has safe, reliable, and modern electrical capacity.

Our 100-Amp & 200-Amp Electrical Service Upgrades service includes:

• Full service evaluation: We assess your current electrical service, panel condition, load requirements, and future electrical needs.
• Main panel replacement: We remove outdated or unsafe panels and install a new, modern, code-compliant electrical panel.
• Meter base & service cable replacement: We upgrade the meter socket and service entrance cable as required to support the new service size.
• Grounding & bonding upgrades: We install or update grounding electrodes, bonding jumpers, and safety components to meet current electrical codes.
• Utility coordination: We coordinate with the electric utility for service disconnects, inspections, and reconnection to ensure a smooth upgrade process.
• Removal of obsolete equipment: Old, damaged, or non-compliant equipment is safely removed and properly disposed of.
• Code-compliant installation: All work is performed to current NEC and local code requirements for long-term safety and reliability.
• Testing & final inspection support: We verify proper operation and assist with required inspections before the service is placed back into operation.

A 100-amp service is ideal for smaller homes with basic electrical needs, while a 200-amp service provides the capacity required for modern appliances, HVAC systems, EV chargers, and future expansion. We ensure your electrical service is built to safely support your home today and tomorrow.

At KNORR Electrical Contractor, we help homeowners keep their electrical systems running safely and reliably with thorough preventative maintenance and professional repairs. Regular inspections and timely fixes protect your home, prevent emergencies, and extend the life of your electrical equipment.

Our Preventative Maintenance & Electrical Repairs service includes:

• Whole-home electrical inspection: We examine your panel, wiring, outlets, switches, lighting, and safety devices to identify issues before they become major problems.
• Testing for safety & performance: We check for loose connections, overheating, corrosion, outdated components, and signs of wear that could pose future risks.
• Panel & breaker maintenance: We tighten connections, test breakers, inspect grounding, and ensure everything is operating within safe limits.
• Outlet, switch & lighting repairs: Whether you have flickering lights, non-working outlets, warm switches, or buzzing fixtures, we diagnose and repair issues on the spot.
• GFCI & AFCI safety upgrades: We ensure proper protection in kitchens, bathrooms, basements, and outdoor areas by installing or repairing modern safety devices.
• Surge protection checks: We evaluate whole-home and point-of-use surge protection to keep your appliances and electronics safe.
• Clear explanations & recommendations: We walk you through any findings and provide straightforward repair options—no pressure, no confusion.
• Clean, efficient service: All repairs are done to electrical code, and we leave your home neat and tidy when the work is complete.

Preventative maintenance gives you peace of mind and reduces the chances of unexpected electrical failures—while timely repairs keep your home safe, efficient, and running the way it should.

At KNORR Electrical Contractor, we’re available around the clock to handle urgent electrical problems that can’t wait. From power outages to safety hazards, our 24-hour emergency service ensures your home and family are protected whenever trouble strikes.

Our 24-Hour Emergency Electrical Service service includes:

• Rapid response: We respond quickly to urgent calls and arrive fully equipped to assess and address the problem.
• Safe diagnosis: We identify the source of electrical issues, including outages, sparking outlets, tripped breakers, or faulty wiring, while keeping your family and property safe.
• Immediate repairs: We perform on-the-spot repairs when possible or implement temporary solutions to restore power and safety until permanent fixes can be completed.
• Code-compliant solutions: All work is done to electrical code, ensuring safety and reliability for the long term.
• Preventative advice: We provide guidance to help prevent future emergencies and recommend upgrades or maintenance if needed.
• Clean, professional service: Even in urgent situations, we leave your home safe, orderly, and fully functional.

Electrical emergencies don’t follow a schedule, but with KNORR Electrical Contractor, you can have peace of mind knowing expert help is just a phone call away—any time, day or night.